PHOSKLEEN

A mild efficient product for the removal of rust stains from paint and metal work. Also used as a toilet cleaner, descaler.

Categories: , ,

Description

PHOSKLEEN- Phosphoric acid cleaner – ACID RUST AND SCALE REMOVER APPLICATIONS:
A mild efficient product for the removal of rust stains from paint and metal work. Also used as a toilet cleaner, phosphoric acid descaler and for the cleaning and brightening of metals such as aluminum and stainless steel. PHOSKLEEN leaves a passivating film on steel which protects against re-rusting.
COMPOSITION:
Phosphoric Acid, Rust Inhibitors and non-ionic Surfactants.
DIRECTIONS FOR USE:
RUST/ SCALE REMOVER – Use at a dilution of 5 to 25% (1 part in 20 to 1 in 4 with water)Depending on the amount of rust/scale to be removed. Remove loose rust/scale with a stiff wire brush, and all traces of oil and grease before treatment.
Apply by brush, cloth or spray or use in a dip tank (plastic, rubber-lined or stainless steel). For faster results, rub with steel wool. As soon as the surface is free of rust or scale you can rinse off with clean water however rinsing is not essential.

For descaling boilers etc in situ pump solution of PHOSKLEEN around the system for a sufficient dwell time.Rinse thoroughly with clean water.
For steel, to preserve the passivation film rinse with a 2% solution of PHOSKLEEN.When dry, approx 30 mins, the surface is ready for painting or priming if required.
CLEANING AND BRIGHTENING OF ALUMINUIM AND STAINLESS STEEL.Use at a dilution of 6-10% (1 part in 15 to 1 in 10 with water). Rinse off thoroughly with clean water after sufficient dwell time and dry off.
For steel, to preserve the passivating film rinse with a 2% solution of PHOSBRITE.

RESTORATION OF GLAZED SURFACES, TOILETS, BATHS, BASINS, CONCRETE AND TERRAZZO – Ingrained dirt, calcium, magnesium and lime scale deposits, rust and uric acid stains can be quickly removed. Use at a dilution of 10%(1 parts in 10 with water).
First clean the surface to remove superficial dirt and grease. Apply the solution of PHOSKLEEN by mop, brush or sponge and allow to soak for at least 10 minutes.For best results agitate the surface at the same time. Finally rinse the surface thoroughly with water.

SAFETY PRECAUTIONS:
Take normal precautions for handling acids. PHOSKLEEN must not be allowed to splash onto ropes as this can cause weakening of the fibres. Do not mix with bleach or any products containing hypochlorite.For more detailed health and safety information request a hazard data sheet.

Reviews

There are no reviews yet.

Be the first to review “PHOSKLEEN”

Your email address will not be published.

Product Enquiry

Name

Email

Product of interest